Ericsson FSU995PM Fusion Splicer
USD $12,995.00
Fitel S175 V2000 Fusion Splicer Used
USD $2,850.00
Fitel S182K Fusion Splicer
USD $1,500.00
USED Fujikura FSM-45F-LDF Fusion Splicer
The FSM-45F-LDF is designed for splicing of large diameter fibers.
The FSM-45F-LDF is equipped with high power arc discharge unit and wide view CCD camera to perform large diameter fiber splicing. The FSM-45F-LDF is modified based on FSM-45F. All the functions of FSM-45F are also available. In order to perform high power arc discharge, two pieces of AC adapters are required, thus they are supplied as standard set.
Features:
- Specialized for LDF splicing up to 500 µm cladding diameter.
- High power arc discharge and wide view CCD camera.
- Core-to-core fiber alignment system with PAS technology.
- V- groove Driving System for various type of fiber diameter.
- Short cleaved length splicing capability.
- Splice loss estimation function.
- Sweep arc function for various kinds of dissimilar fiber splicing.
- Power monitor feedback alignment capability with GP-IB interface.
- USB terminal and serial port for PC communication.
KIT includes:
- Case
- Fiber clamp-45-125
- Fiber clamp-45-250
- Fiber clamp-45-400
- Fiber clamp-45-900
- Alan wrench
- Fiber holders FH-40-250
- Fiber holders FH-40-400
- Fiber holders FH-40-900
- Shoulder strap
- 2x ADC AC Adaptor
- 2x AC power cord
Request Pricing
Out-of-Stock
Condition
Used
Reference:
FSM-45FLDFUsed1
Brand:
Fujikura AFL FSM-45F-LDF Optical Fiber Fusion Splicer for Large Diameter Fiber USED
- S/N 00704
- Arc count: 75
- Total arc: 9758
Specifications
- Applicable fibers: Large diameter fiber, SM, MM, NZDS, DS
- Fiber count: Single
- Cladding diameter: 125 µm to 500 µm
- Coating diameter: 150 µm to 1000 µm
- Fiber cleaved length:
- 8 mm to 10 mm (standard)
- 3 mm to 5 mm (short cleaved length)
- Actual average splice loss (Measured at wavelength of 1550 nm):
- 0.03 dB with SM
- 0.02 dB with MM
- 0.05 dB with DS (with bare fiber clamping)
- Splice time:
- 35sec. with 400 µm LDF
- 20sec. with SM
- 20sec. with MM
- 40sec. with DS
- Return loss: > 60 dB
- Splicing modes: 40 user programmeble modes and 120 database area (factory predetermined setting)
- Splice loss estimate: Available
- Attenuation splice function: 0.1 dB to 25 dB
- Storage of splice result The last 1200 splices to be stored in the internal memory
- Fiber display: X/Y, or X and Y simultaneously
- Magnification: 135x for single X or Y view, or 67x for X and Y view
- Viewing method: Two CCD cameras and 5 inch TFT color LCD monitor
- Operating condition:
- 0 to 3500 m above sea level
- 0 to 95%RH
- 0 to 40°C
- Mechanical proof test: 2.45 N
- Tube heater: Built-in tube heater with 10 heating modes and 20 database area
- Tube heat time:
- Typical 100sec with FP-03 protection sleeve
- Typical 70sec with series of micro sleeves
- Applicable protection Sleeve: 60 mm, 40 mm, and a series of micro sleeves
- Power supply: Auto voltage selection from 100 to 240 V AC. with two ADC-10s
- Option included: U-Stage-NFF Fujikura universal stage modification for the FSM-45F-LDF fusion splicer, Allows 0° angle, increase 400 µm fiber splicing performance
Please contact us for more information!!