You may also like

Sumitomo TYPE-37SE Fusion Splicer

The Sumitomo Type-37SE Micro-Core Alignment Fusion Splicer is a light weight, portable, fully automatic, self-contained instrument for low-loss optical fiber splices. The core alignment Type 37SE can splice SMF (singlemode fiber), MMF (multimode fiber), NZ-DSF, CSF and Er-doped Fiber (Erbium doped fiber). It can splice 80µum to 150 µm cladding diameter and 250 µm to 900 µm coating diameter. The cleave length is from 8 mm to 16 mm. The operation can be performed in as little as 11 seconds with a typical splice loss of 0.02 decibels (dB) for identical single-mode fibers.

Click the PDF Specification for further information.

Read moreShow less

Request Pricing

5 1
,
5/ 5
Out-of-Stock
Condition
Used
Reference:
TYPE-37SE
Brand:
Description

Sumitomo Type-37SE Micro-Core Alignment Fusion Splicer.

Specifications of Type-37SE

  • Alignment method: core alignment
  • Fiber requirement: Silica Glass
  • Fiber type: SMF, MMF, NZ-DSF, CSF, Er-doped Fiber
  • Cladding diameter: 80-150 µm
  • Coating diameter: 250-900 µm
  • Cleave length: 8 to 16 mm
  • Total splice loss, indentical fiber: SMF: 0.02 dB, MMF: 0.01 dB, NZ-DSF: 0.03 dB
  • Number of fusion condition settings: 48
  • Splice parameters: 5 adjustable
  • Number of fiber profiles: 40
  • Number of heather condition settings: 10
  • Typical splice cycle time quick mode: 11 sec
  • Typical splice cycle time standard mode: 15 sec
  • Typical heater cycle time: < 40 sec

Physical Characteristics

  • Weight: 4.1 kg, (9.0 lbs)
  • Battery operation: 40+ splices including heat for sleeves

Accessories such as cleaver, battery, pwr cord, fiber adapters, protection sleeves are not included

Read moreShow less
Product Details
TYPE-37SE
Terms and Conditions

Settings

Click for more products.
No products were found.

Menu