The LTA-HS High Speed Motorized Actuator is optimized for high-speed applications and provides a 50 mm travel range. LTA actuators are designed to fit into selected manual stages and other opto-mechanical components as direct replacement for manual micrometers. [Refer to the actuator compatibility table.] Features a space-saving design with the motor and lead screw mounted side-by-side. This reduces the actuator length by 50% and minimizes the unwanted effects of long cantilever loads on micro-positioning equipment. The non-rotating tip prevents wear and avoids periodic motion variations which can be caused by variable contact between a rotating tip and its mating surface. Precision motion is accomplished through a miniature DC servo motor with optimized output torque. This allows for faster motion and high load capacity. A movable limit switch prevents over-travel. The switch positions can be changed in minutes to adjust the maximum travel position. A manual adjustment knob permits quick positioning of the actuator when the motor is off. A scale indicates coarse actuator position in both millimeters and inches.
Request Pricing
Technical Specs |
|
Push Force |
50 N |
Pull Force |
40 N |
Travel Range |
50 mm |
Minimum Incremental Motion |
0.10 µm |
Maximum Speed |
5 mm/s |
Accuracy, Typical |
±2.2 µm |
Accuracy, Guaranteed |
±5.0 µm |
Bi-directional Repeatability (Typical) |
±0.30 µm |
Bi-directional Repeatability, Guaranteed |
±1.0 µm |
Uni-directional Repeatability (Typical) |
±0.10 µm |
Uni-directional Repeatability, Guaranteed |
±0.25 µm |
Origin Repeatability |
±2 µm |
Cable Length |
3 m |
Vacuum Compatibility |
No |
Weight |
0.48 kg |
MTBF |
10,000 h (25% load, 30% Duty cycle) |
RoHS |
Compliant |
Maximum Power Consumption |
10 W |
Compatible XPS-RL Driver Module |
XPS-DRV01 |
Compatible XPS-D Driver Module |
XPS-DRV11 |
ESP301 Compatibility |
Yes |
SMC100 Compatibility |
SMC100CC |