Agilent 86130A Bit Analyzer 3.6 Gb/s

Agilent 86130A Bit Error Performance Analyzer

Specifications

Pattern Generator Parameters

• Operating Frequency: 50 MHz to 3.0 GHz with internal clock source

Internal Clock Source

• Frequency Range: 50 MHz to 3.0 GHz
• Frequency Accuracy: ± 20 ppm

Input/Output Specifications

Data and Data Outputs

• Data and Data outputs are independently settable
• Format: NRZ
• Polarity: Normal or Inverted
• Amplitude: 0.5 to 2 V in 10 mV steps
• Offset: 10mV resolution.
• Data Outputs On/Off: ‘Off’ goes to high impedance state
• Supported Terminations:
  
  • 0 V (LVTTL, SCFL, etc.)
  • -2 V (ECL)
  • +1.3 V (3.3 V PECL)
  • AC-coupled
• Jitter (pk-pk): < 20 ps, < 12 ps typical (w/internal source)
• Transition Time (10-90%): < 42 ps, < 30 ps typical (25C)
• Variable Crossover: Supported
• Clock/ Data Delay Range: 0-1 bit period or 10 ns, whichever is less. 1 ps resolution.
• Interface: DC-coupled 50½ reverse terminated, APC-3.5 connector

Clock and Clock Outputs

• Clock and Clock outputs are independently settable
• Amplitude: 0.5 to 2 V in 10 mV steps
• Clock Outputs On/Off: ‘Off’ goes to high impedance state
• Supported Terminations:
  
  • 0 V (LVTTL, SCFL, etc.)
  • -2 V (ECL)
  • +1.3 V (3.3 V PECL)
  • AC-coupled
• Transition Time (10-90%): < 42 ps, < 35 ps typical (25C, 3 GHz)
• Interface: DC-coupled 50½ reverse terminated, APC-3.5 connector

Error Detector Input/Output Specifications

Error Detector Parameters

• Operating Frequency 50 MHz to 3.6 GHz.

Data Input

• Polarity: Normal or Inverted
• Input Amplitude: 0.1 to 2 V (typical)
• Threshold Range: +3 to -3 V
• Threshold Resolution: 0.5 mV
• Terminations: Via 50½ to -2 V, 0 V, +1.3 V
• Data Input Delay Range: 0-1 bit period, or 10 ns whichever is less. 1 ps resolution
• Interface: DC-coupled 50½, APC-3.5 female connector

Clock Input

• Clock Input functions-switchable termination voltages, input frequency measurement, clock invert.
• Bit Rate: 50 MHz to 3.6 GHz
• Data Sampling Clock Edge: Selectable Rising or Falling
• Input Amplitude: 0.2 to 2 V (typical)
• Terminations: Via 50½ to -2 V, 0 V, +1.3 V
• Interface: DC-coupled 50½, APC-3.5 female

Environmental

• Warm-up time 30 minutes
• Operating Temperature Range to specification 10 to 45°C
• Humidity 15 to 95% at 45°C non-condensing

Electrical

• Supply Voltage Parameters 90 V-250V AC, 50-60Hz
• Power Consumption < 300W