ILX Lightwave CC515S 1 m DB15-to-DB9 Laser Diode and TEC Controller Cable
The ILX Lightwave CC515S is a 1-meter DB15-to-DB9 interconnect cable for compatible ILX Lightwave laser diode controllers, combination LDD/TEC modules, fixtures, and laser diode mounts. It supports plug-and-play connections between compatible controller modules, including the 3916376, 3916372, and 3916371 series, and supported fixtures such as the 4616, 4680, and 4684 series. Twisted-pair signal wiring and an outer braided shield help minimize electromagnetic noise and maintain clean laser diode drive, temperature-control, sensor, and monitoring signals.
Request Pricing
ILX Lightwave CC515S DB15-to-DB9 Laser Diode and TEC Controller Cable
The ILX Lightwave CC515S is a specialized instrument interconnect cable designed for compatible ILX Lightwave laser diode controllers, combination laser diode driver and thermoelectric cooler modules, laser diode fixtures, and temperature-controlled mounts. It provides a direct connection between a DB15 controller interface and a compatible DB9 fixture or mount interface.
The standard cable length is 1 meter, providing practical routing distance between an ILX Lightwave instrument and a laser diode test fixture on a laboratory bench or within a production test station. Custom cable lengths may also have been available for specialized system-integration requirements.
The CC515S uses twisted-pair signal conductors with an outer braided shield. This construction helps minimize electromagnetic noise generation and reception, supporting clean laser diode drive, thermoelectric cooler control, temperature-sensor feedback, monitor signals, and related functions carried between compatible instruments and fixtures.
The cable is designed for plug-and-play use with supported ILX Lightwave equipment. Compatible controller or combination-module families include the 3916376, 3916372, and 3916371 series, while compatible laser diode fixtures and mounts include supported models within the 4616, 4680, and 4684 series. Exact compatibility should always be confirmed from the instrument and fixture documentation before connection.
Features and Benefits of the ILX Lightwave CC515S
The ILX Lightwave CC515S provides a purpose-built connection for professional laser diode testing, temperature control, device characterization, and production workflows.
- DB15-to-DB9 configuration: Connects a compatible 15-pin controller interface to a supported 9-pin laser diode fixture or mount.
- One-meter standard length: Provides convenient instrument-to-fixture routing for laboratory benches and production stations.
- Twisted-pair signal wiring: Helps reduce electromagnetic coupling and interference between supported electrical signals.
- Outer braided shielding: Provides additional protection against electromagnetic noise entering or leaving the cable assembly.
- Clean laser diode signals: Supports stable current-drive, monitoring, and control connections in compatible laser diode test systems.
- TEC controller integration: Supports compatible thermoelectric cooler control and temperature-sensor feedback functions.
- Plug-and-play operation: Designed for direct use with supported ILX Lightwave equipment without custom field wiring.
- Controller-module compatibility: Supports compatible ILX Lightwave modules such as the 3916376, 3916372, and 3916371 series.
- Fixture and mount compatibility: Designed for supported ILX Lightwave fixtures and mounts such as the 4616, 4680, and 4684 series.
- Professional test applications: Suitable for laser diode development, production screening, incoming inspection, and optoelectronic research.
Laser Diode Driver Interfacing
Laser diode drivers regulate the electrical current supplied to a laser diode. Stable current delivery is important because laser diodes can be damaged by excessive current, voltage transients, electrostatic discharge, incorrect polarity, or intermittent connections.
The CC515S carries supported laser diode driver connections between compatible ILX Lightwave instrumentation and a corresponding device fixture or mount. The dedicated cable assembly eliminates the need to build an unverified custom harness for supported equipment combinations.
The connected laser diode driver output should remain disabled while the cable and device connections are installed or removed. The laser diode pinout, polarity, maximum current, compliance voltage, monitor photodiode orientation, and safety interlock should be verified before the driver output is enabled.
Thermoelectric Cooler Controller Interfacing
Compatible ILX Lightwave combination modules can provide both laser diode current control and thermoelectric temperature control. The thermoelectric controller regulates the temperature of a mounted laser diode by driving a compatible TEC element and monitoring a thermistor or another supported temperature sensor.
The CC515S provides the required connection between supported controller modules and compatible fixtures or mounts. Depending on the equipment configuration, the cable can carry thermoelectric cooler current, temperature-sensor signals, laser diode connections, monitor-photodiode signals, interlock circuits, and related control connections.
The thermistor type, sensor resistance, TEC polarity, TEC current limit, TEC voltage limit, temperature setpoint, and protection settings should be confirmed before temperature control is enabled. Incorrect settings can cause unstable temperature regulation or damage the mounted device.
Twisted-Pair Signal Construction
The CC515S uses twisted-pair wiring for supported signal paths. Twisting related conductors helps reduce electromagnetic fields produced by current flow and improves rejection of external interference.
This construction is valuable in laser diode testing because electrical noise can affect current stability, monitor-photodiode measurements, thermistor readings, and temperature-control performance. Clean signal transmission helps maintain repeatable device characterization and stable operating conditions.
The cable should be routed away from high-power switching supplies, transformers, motors, relays, radio-frequency sources, and other equipment that may introduce electrical interference.
Outer Braided Shielding
An outer braided shield surrounds the internal conductors to provide additional electromagnetic protection. The shield helps reduce noise entering sensitive signal paths and limits electromagnetic emissions from the cable assembly.
Shield performance depends on proper connection to compatible equipment. The instrument, cable, fixture, and test-station grounding arrangement should follow the applicable ILX Lightwave documentation.
The cable shield should not be modified or connected arbitrarily to laboratory ground. Unapproved grounding changes can create ground loops, increase electrical noise, bypass protective circuitry, or alter measurement results.
One-Meter Standard Length
The standard CC515S cable is 1 meter long. This length provides convenient separation between the controller and device fixture while limiting unnecessary cable length in a typical laboratory or production setup.
The cable should be routed with broad curves and sufficient slack to avoid strain on the DB15 and DB9 connectors. Tight bends, crushing, twisting, pulling, and repeated flexing near the connector strain relief should be avoided.
Custom lengths may have been available for specialized equipment layouts. A cable with a different length should be identified by its applicable product marking or supporting documentation before it is listed as a standard CC515S configuration.
Compatible ILX Lightwave Controller Modules
The CC515S is designed to connect compatible ILX Lightwave controller or combination modules to supported laser diode fixtures and mounts. Documented examples include controller-module families identified as 3916376, 3916372, and 3916371.
The complete instrument configuration should be reviewed before the cable is installed. Controller modules with similar physical connectors may use different electrical assignments, current limits, temperature-control capabilities, or interlock arrangements.
Compatibility should be established from the controller manual, fixture manual, cable specification, or original equipment configuration. Connector type alone does not establish safe electrical compatibility.
Compatible Laser Diode Fixtures and Mounts
The CC515S supports compatible ILX Lightwave laser diode fixtures and mounts, including supported products within the 4616, 4680, and 4684 series.
These fixtures provide a controlled mechanical and thermal interface for compatible laser diode packages. Depending on the mount, supported functions can include laser diode connection, monitor-photodiode access, thermoelectric cooling, temperature sensing, optical access, and safety interlocking.
The installed device package, mount wiring, controller capability, and CC515S pinout must all be compatible. Device pin configuration and polarity should be verified before a laser diode is inserted into the fixture.
Not a General-Purpose DB15-to-DB9 Cable
The CC515S should not be treated as a general-purpose serial, computer, video, or communications cable. DB15 and DB9 connectors are used for many unrelated interfaces, each with different pin assignments and electrical requirements.
A generic DB15-to-DB9 cable may not reproduce the CC515S wiring, conductor size, twisted-pair arrangement, shielding, grounding, current capacity, or interlock connections. Substituting an unverified cable can cause incorrect operation or damage the controller, fixture, laser diode, thermoelectric cooler, or temperature sensor.
The CC515S should only be connected to equipment that specifically supports the cable or has been verified against the correct electrical pinout.
Typical Applications
The ILX Lightwave CC515S is suitable for professional applications such as:
- Laser diode driver interconnection
- Thermoelectric cooler controller interfacing
- Laser diode mount connection
- Laser diode electrical characterization
- Temperature-controlled optical testing
- Laser diode incoming inspection
- Production screening and qualification
- Optoelectronic component development
- Photonics laboratory experiments
- Automated laser diode test systems
- Compatible ILX Lightwave system integration
- Replacement interconnect cable requirements
Product Overview
| Brand | ILX Lightwave |
| Model | CC515S |
| Product Category | Laser Diode Driver and TEC Controller Interconnect Cable |
| Controller-Side Connector | DB15 |
| Fixture-Side Connector | DB9 |
| Standard Length | 1 meter |
| Signal Construction | Twisted-pair conductors |
| Shielding | Outer braided shield |
| Primary Application | Connecting compatible ILX Lightwave controller modules to supported laser diode fixtures and mounts |
Specifications
| Specification | Details |
| Manufacturer | ILX Lightwave |
| Model Number | CC515S |
| Cable Type | LDD and TEC controller interconnect cable |
| Connector Configuration | DB15 to DB9 |
| Standard Cable Length | 1 meter |
| Internal Wiring | Twisted-pair signal conductors |
| External Shielding | Braided shield |
| Operating Style | Plug-and-play with compatible ILX Lightwave equipment |
Documented Equipment Compatibility
| Equipment Type | Documented Compatible Examples |
| ILX Controller and Combination Modules | Compatible 3916376, 3916372, and 3916371 series configurations |
| ILX Laser Diode Fixtures and Mounts | Compatible 4616, 4680, and 4684 series configurations |
Compatibility Details Requiring Verification
| Compatibility Item | Verification Required |
| Controller Model | Confirm that the installed ILX Lightwave controller or combination module specifies the CC515S |
| Fixture or Mount Model | Confirm that the receiving fixture uses the compatible DB9 interface and CC515S wiring |
| Connector Gender | Verify both cable ends against the available instrument and fixture ports |
| Electrical Pinout | Verify all signals before connection to custom or third-party equipment |
| Laser Diode Current Path | Confirm polarity, return path, voltage, and current limits |
| TEC Current Path | Confirm thermoelectric cooler polarity, voltage, and current limits |
| Temperature Sensor | Confirm thermistor type, resistance range, and signal assignments |
| Monitor Photodiode | Confirm polarity, current range, and connector assignments where applicable |
| Interlock Circuit | Confirm the required interlock path and safe-output behavior |
Installation and Use
The connected controller should be switched off or placed in a safe output-disabled state before the CC515S is installed or removed. Laser diode current and thermoelectric cooler outputs should remain disabled during cable connection.
Both cable connectors should be inspected for bent, recessed, contaminated, or missing contacts. The DB15 and DB9 shells should be aligned carefully with their matching ports and inserted without excessive force.
The connector retaining hardware should be tightened evenly after each connector is fully seated. The cable should then be routed with sufficient slack and suitable strain relief.
Before enabling the equipment, the laser diode polarity, current limit, TEC polarity, temperature-sensor configuration, temperature setpoint, voltage limits, interlock state, and protective shutdown settings should be reviewed.
Cable Care and Handling
The CC515S should be disconnected by gripping the connector shell rather than pulling on the cable jacket. Retaining hardware should be completely released before a connector is removed.
The cable should be stored in a loose coil and protected from tight bends, crushing, moisture, chemical exposure, high temperatures, sharp edges, and heavy objects.
Repeated flexing near the connectors can damage the internal conductors, braided shield, and strain relief. The cable should be supported when used in permanent or frequently reconfigured test fixtures.
Comprehensive Functional Testing
The ILX Lightwave CC515S receives comprehensive functional testing before shipment. Evaluation may include inspection of the DB15 and DB9 connectors, contacts, shells, retaining hardware, strain relief, cable jacket, shielding, and model identification.
Electrical testing may include conductor continuity, short-circuit inspection, shielding continuity, and verification of the required internal wiring when the applicable CC515S pinout is available.
When compatible ILX Lightwave equipment is available, the cable may be tested between a supported controller module and laser diode fixture. Testing may include interlock continuity, temperature-sensor response, TEC operation, monitor-signal continuity, and controlled laser diode current operation within safe limits.
The exact testing scope depends on the compatible controller, fixture, pinout, device configuration, reference equipment, and required operating conditions.
Buyer Considerations
Buyers should confirm the complete cable model as ILX Lightwave CC515S and verify that the connected controller and fixture explicitly support this cable configuration.
The CC515S should not be replaced with a generic DB15-to-DB9 cable. Connector appearance alone does not establish the required wiring, shielding, signal assignments, current capacity, or interlock compatibility.
The product listing should identify the condition of both connectors, contact pins, shells, retaining hardware, strain relief, braided shielding, cable jacket, model markings, and functional test results.
Only the ILX Lightwave CC515S cable and accessories specifically identified in the product listing should be considered included.
Why Buy from AssetRelay?
AssetRelay supplies professional equipment and product solutions for laser diode testing, thermoelectric temperature control, photonics, fiber optics, telecommunications, laboratory, production, inspection, electronic testing, RF/microwave, and technical research applications. The ILX Lightwave CC515S supports laser manufacturers, optoelectronic laboratories, production facilities, service organizations, system integrators, universities, and research teams.
Buyers should review the CC515S model number, DB15-to-DB9 configuration, one-meter length, twisted-pair wiring, braided shielding, controller compatibility, fixture compatibility, connector condition, functional test results, and included accessories before purchase.