EXFO FTBx-2150-2346B-4-EA DFB Laser Source...
Yokogawa AQ2200-141 1550 nm FP-LD Optical Light...
The Photonetics OSICS 3613 CWL is a continuous-wave distributed feedback laser module designed for compatible OSICS modular optical source platforms. It provides a stable, narrow-linewidth optical source for DWDM testing, passive component characterization, telecommunications research, and multiwavelength test systems. The module supports local or remote control through the OSICS mainframe and uses a polarization-maintaining fiber output with an FC/APC optical interface.
Request Pricing
The Photonetics OSICS 3613 CWL is a continuous-wave distributed feedback laser module designed for installation in a compatible OSICS modular optical source platform. The module provides a stable, narrow-linewidth optical output for dense wavelength division multiplexing testing, optical component characterization, telecommunications research, and other professional photonics applications.
OSICS DFB modules use high-performance distributed feedback laser diodes and are designed to operate as fixed-channel sources with fine wavelength-tuning capability. C-band and L-band versions can be configured at user-selected wavelengths on the ITU-T grid, while a separate 1310 nm version is available for channel-monitoring applications. The exact center wavelength and installed options of the 3613 CWL module should be confirmed from its identification label and operating configuration.
The module operates within an OSICS mainframe, which can accommodate up to eight compatible optical source or amplifier modules. DFB, tunable external cavity laser, amplified spontaneous emission source, and erbium-doped fiber amplifier modules can be combined in one platform to create a flexible multichannel optical test system.
The Photonetics OSICS 3613 CWL provides a stable continuous-wave optical source for professional users working with DWDM components, optical networks, and laboratory photonics systems.
The OSICS 3613 CWL uses distributed feedback laser technology to provide a narrow optical spectrum and stable continuous-wave output. DFB lasers are useful in applications where a defined optical wavelength, narrow spectral width, and stable power are required.
For C-band and L-band OSICS DFB configurations, the documented center-wavelength range is 1527.2 nm to 1610.05 nm. The center wavelength was selected at the time of order on the ITU-T grid. Because the precise optical channel is configuration-specific, buyers should verify the wavelength shown on the individual module before integrating it into a DWDM system.
The standard C-band and L-band configuration provides +10 dBm output power, with a +13 dBm high-power option. The spectral width is specified at less than 30 MHz, while the side-mode suppression ratio is greater than 40 dB under the specified operating conditions. These characteristics support wavelength-selective component testing and multichannel optical experiments.
The OSICS platform is an eight-channel modular system developed for fiber optic component and system testing, particularly DWDM applications. A compatible mainframe can host as many as eight plug-in sources and amplifiers in one instrument.
Supported module families include OSICS-DFB distributed feedback lasers, OSICS-ECL tunable external cavity lasers, OSICS-ASE broadband amplified spontaneous emission sources, and OSICS-EDFA erbium-doped fiber amplifiers. These module types can be mixed within the mainframe to create multiwavelength source and amplifier configurations suited to a particular test application.
The OSICS mainframe provides front-panel operation through its display and controls. Remote operation is supported through RS-232C and IEEE-488.2 interfaces, allowing the installed module to be included in computer-controlled test platforms and automated measurement sequences.
OSICS DFB modules support external analog modulation from 200 Hz to 1 GHz. Digital modulation is supported from 1 Hz to 1 MHz through internal or external modulation. The platform also includes a Brillouin effect suppression function for applications where stimulated Brillouin scattering may affect optical transmission or test performance.
The DFB optical output uses an FC/APC connector on polarization-maintaining fiber. The documented output isolation is 35 dB, and return loss is specified at 60 dB. Appropriate polarization-maintaining jumpers should be used when the application requires preservation of the output polarization state.
The Photonetics OSICS 3613 CWL Distributed Feedback Laser Module is suitable for professional applications such as:
| Brand | Photonetics |
| Model | OSICS 3613 CWL |
| Product Category | Continuous-Wave Distributed Feedback Laser Module |
| Laser Technology | Distributed feedback laser diode |
| Compatible Platform | OSICS eight-slot modular optical source and amplifier mainframe |
| Optical Output | Polarization-maintaining fiber |
| Optical Connector | FC/APC |
| Primary Application | Stable continuous-wave optical sourcing for DWDM and photonics testing |
| Suitable For | Telecommunications laboratories, photonics research, optical component characterization, production testing, and automated measurement systems |
| Specification | Details |
| C-Band and L-Band Center-Wavelength Range | 1527.2 nm to 1610.05 nm |
| Available 1310 nm Configuration | 1310 nm ±25 nm |
| Wavelength Tuning Range | 1.6 nm; 1.8 nm typical |
| Wavelength Accuracy | ±0.03 nm after warm-up under the specified conditions |
| Wavelength Stability | ±0.005 nm per hour; ±0.005 nm per 24 hours typical under the specified conditions |
| Standard C-Band and L-Band Output Power | +10 dBm |
| Optional C-Band and L-Band Output Power | +13 dBm with P13 option |
| 1310 nm Model Output Power | +3 dBm |
| Power Stability | ±0.01 dB per hour; ±0.01 dB per 24 hours typical under the specified conditions |
| Spectral Width | Less than 30 MHz FWHM |
| Side-Mode Suppression Ratio | Greater than 40 dB for C-band and L-band models; greater than 32 dB for the 1310 nm model |
| Relative Intensity Noise | Greater than 145 dB/Hz typical as stated in the manufacturer documentation |
| Output Isolation | 35 dB |
| Return Loss | 60 dB |
| Analog Modulation | 200 Hz to 1 GHz, external |
| Digital Modulation | 1 Hz to 1 MHz, internal or external |
| Optical Interface | FC/APC connector on polarization-maintaining fiber |
| Specification | Details |
| Module Dimensions | 35 mm x 130 mm x 250 mm |
| DFB Module Weight | Approximately 0.7 kg |
| Operating Temperature | +15 °C to +35 °C |
| Typical Warm-Up Time | 1 hour at room temperature |
| Mainframe Control Methods | Front panel, RS-232C, and IEEE-488.2 |
| Mainframe Capacity | Up to eight compatible OSICS modules |
The Photonetics OSICS 3613 CWL should be treated as a configuration-specific optical source module. Buyers should verify the precise center wavelength, installed power option, optical jumper requirements, modulation configuration, firmware compatibility, and host-mainframe support before purchase.
The exact channel wavelength should not be inferred solely from the 3613 CWL identification. OSICS DFB modules were configured at selected ITU-T grid wavelengths, and individual units may include different wavelength or power options. The module label, available test results, and host-system configuration should be reviewed to establish the supplied optical channel.
A compatible OSICS mainframe is required to power, control, and configure the module. The mainframe, polarization-maintaining optical jumper, computer, interface cable, software, and other accessories should not be assumed to be included unless specifically identified in the product listing.
The OSICS module produces invisible laser radiation. Direct exposure to the optical output must be avoided, and appropriate laser-safety procedures should be followed during installation, testing, and operation. The OSICS platform documentation identifies the system as a Class IIIb laser product with a maximum output power of 100 mW across the 1200 nm to 1700 nm wavelength region.
The FC/APC connector and mating polarization-maintaining jumper should be inspected and cleaned before connection. Dust, residue, scratches, or damaged end faces can increase insertion loss, create reflections, and affect measurement stability. Protective caps should remain installed whenever the optical interface is not in use.
Optical fibers should not be sharply bent, pulled, twisted, or pinched. Suitable strain relief and bend-radius control should be maintained, particularly when polarization performance is important to the test application.
When applicable, the Photonetics OSICS 3613 CWL can undergo comprehensive functional and performance testing before shipment. Available evaluation may include mainframe recognition, power-up operation, optical output verification, center-wavelength measurement, wavelength-tuning checks, output-power measurement, stability observation, modulation testing, and optical interface inspection.
The extent of testing depends on the available OSICS mainframe, optical spectrum analyzer, wavelength meter, optical power meter, modulation equipment, polarization-maintaining jumpers, and other supporting resources. Buyers with specific wavelength, power, stability, modulation, connector, or mainframe-compatibility requirements should communicate those requirements before purchase.
AssetRelay supplies professional equipment and product solutions for fiber optic, telecom, laboratory, production, inspection, cleaning, RF/microwave, electronic test, motion control, and photonics applications. This product is listed to help technical buyers, procurement teams, engineers, researchers, laboratory personnel, system integrators, and service organizations source specialized optical test equipment for professional environments.
Before purchasing, buyers should review the complete model identification, module label, product photographs, condition information, center wavelength, output-power option, included accessories, mainframe compatibility, and available testing details. Confirming these factors is particularly important when sourcing fixed-channel laser modules for DWDM testing and wavelength-sensitive optical applications.
Please sign in first.
Sign in