Related in stock products

USED Fujikura FSM-45 PM LDF Splicer

The Fujikura FSM-45F-LDF is designed for splicing of large diameter fibers. It is equipped with a high power arc discharge unit and wide view CCD camera to enable it to perform large diameter fiber splicing.

Since the FSM-45F-LDF is a modified version of the FSM-45F, all the functions of FSM-45F are available.

In order to perform the high power arc discharges required for large diameter splicing, the FSM-45F-LDF requires two AC adapters. They are supplied with the unit.


  • CC-05-45F /ZFIX-01 Carrying Case with Z Unit Fixture
  • CLAMP-45-80/400 (80-400 µm coating or cladding)
  • Alan wrench
  • Fiber holders FH-40-250
  • Fiber holders FH-40-900
  • Shoulder strap
  • 2X ADC AC Adaptor
  • 2X AC power cord
  • Instruction manual
Read more
5 1
5/ 5
Yes, we have 1 in stock


Applicable fibers Standard & large diameter fibers, SM, MM, NZDS, DS, UHNA, rare earth doped, micro-structured, other specialty fiber types
Cladding diameter 125 µm to 500 µm
Coating diameter 150 µm to 1000 µm
Fiber cleaved length 8 mm to 10 mm (standard), 3 mm to 5 mm (short cleaved length)
Typical splice loss
(bare fiber clamping)
0.03 dB with SM, 0.02 dB with MM, 0.05 dB with NZDS & DS
Splice time 35 sec. with 400 µm LDF, 20 sec. with SM, 40 sec. with DS
Return loss > 60 dB
Splicing modes 40 user programmable modes and 120 database (factory predetermined setting)
Splice loss estimate Available
Attenuation splice function 0.1 dB to 25 dB
Storage of splice result Last 1,200 splices to be stored in the internal memory
Fiber display X/Y, or X and Y simultaneously
Magnification 135x for single X or Y view, or 67x for X and Y view
Viewing method Two CCD cameras and 5 inch TFT color LCD monitor
Operating condition 0 to 3500 m above sea level
0 to 95% RH and 0 to 40 °C respectively
Mechanical proof test 2.45 N
Tube heater Built-in tube heater with 10 heating modes and 20 database area
Tube heat time Typical 100 sec. with FP-03 protection sleeve
Typical 70 sec. with series of micro sleeves
Power supply Auto voltage selection from 100 to 240 V AC with two ADC-10 AC Adapters
Wind protection Max. wind velocity of 5 m/s
Weight 5.5 kg without AC adapters
Read more
Product Details


Click for more products.
No produts were found.