Used Fujikura FSM-60S Fusion Splicer
The fsm-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test.
The fsm-60S splices a fiber in 9 seconds and heats a 60 mm splice sleeve in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation and battery charge capability during splicer operation provide the end user a productivity tool they can count on. New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.
Request Pricing
Specifications at a glance:
Applicable fibers | Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) |
Cladding diameter | 80µm to 150µm |
Coating diameter | 100µm to 1,000µm |
Fiber cleave length | 8 to 16mm with 250µm coating diameter, 16mm with 900µm coating diameter |
Typical Average Splice loss | 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards |
Splicing Time | Typical 9 seconds with standard single-mode fiber |
FSM-60S Fusion Splicer comes with:
- ADC-13 AC Adapter
- ACC-14 AC cord (or equivalent)
- S60A Sheath Clamps
- Transit Case
- 30 day warranty