JDS 9/125um Optical Switch 4x165 FC/APC
USD $9,995.00
JDS 9/125 um Optical Switch 8x16
USD $3,397.00
JDS 9/125 um Optical Switch 6X24
USD $2,999.00
16x16 Matrix Switch LC in TS-30 rack
Suitable for a wide range of applications, the PHOTONCOM Optical Switch offers ultra low optical loss on all paths. Fiber pigtails, terminated with high performance connectors are used for fiber interfacing.
The optical switch is controlled using a text based Command Line Interface (CLI) .
Key Features
- Ultra-low insertion loss
- Low polarization dependant loss
- Fast switching speed
- Excellent repeatability
- High optical power handling
- Operates with dark or lit fiber
- Strictly non-blocking
- Bi-directional operation
- Protocol and bit rate independent
- Ethernet and RS-232 interface
The operation of the switch is based on piezo-electric actuation and capacitive sensing. This achieves ultra-low insertion loss and polarization dependant loss (PDL) by simply steering the input optical beams to point directly at the required output position without the intervention of mirrors or other elements that can reduce the optical performance. It is a passive optical component in the sense that it does not generate or amplify laser radiation.
Request Pricing
Out-of-Stock
Condition
Used
Reference:
PSM1616LCUF_kit
Brand:
Photoncom New Matrix Optical Switch 16x16, Model Number PSM-16-16-LC-U-F installed in an Innocor 3U TS-30 frame
Configuration
- Input ports: 16
- Output ports: 16
- Connector Type: LC
- Polish: UPC
- Fiber Connector Location: Bulkhead on front
- Enclosure Type: 3U, 3 Slot
- Interface: Ethernet and RS-232
Specifications
- Fyber type: Single-mode (SMF28) 900 micron diameter
- Insertion Loss @ 1550 nm1: 1.0 dB
- Polarization Dependent Loss: < 0.05 dB
- Crosstalk: < -70 dB
- Operating Wavelength Range: 1260-1625nm
- Wavelength Dependent Loss: <0.3dB (C+L Band)
- Repeatability: ± 0.05 dB
- Return Loss2: > 55 dB
- Switching Time: < 17 ms
- Maximum Optical Power3: +27 dBm
- Switch Lifetime: 108 cycles
- Operating Temp (Normal): +10°C to +40°C, < 85% RH non-condensing
- Operating Temp (Extended): - 5°C to +55°C, < 90% RH non-condensing
- Storage Temp (Normal): -40°C to +70°C, < 40% RH non-condensing
- Storage Temp (Extended): -40°C to +70°C, < 95% RH non-condensing
- Qualification (Normal): Designed to meet EN60950
- Qualification (Extended): Designed to meet Telcordia GR63 and EN60950
All parameters are measured excluding connectors at 1550 nm and 20°C with an
unpolarized source after thermal equalization unless stated.
1 Measured using a 3 patch-cord method as defined in TIA/EIA-526-14A
2 With APC connectors: Return loss > 70 dB without connectors
3 Switch will operate on dark fiber