Westover FCL-B1000 Bench-Top CleanBlast Fiber...
The EXFO FIP-400 is a portable video fiber inspection probe for examining optical connector end faces, patch cords, and bulkhead adapters. Its slim, lightweight design helps technicians inspect connectors in crowded patch panels and hard-to-reach locations without disturbing adjacent fibers. The probe offers adjustable focus, coaxial blue LED illumination, image-capture capability, and detection of dirt or defects smaller than 1 µm. Interchangeable inspection tips support APC, UPC, MTP, FC, SC, ST, LC, E-2000, and universal 1.25 mm or 2.5 mm ferrule applications.
Request Pricing
The EXFO FIP-400 is a portable video fiber inspection probe designed for examining fiber optic connector end faces, patch cords, and bulkhead adapters. It helps technicians identify contamination, scratches, surface defects, and other conditions that can reduce optical performance or damage connected equipment.
Contaminated or damaged connectors are a common cause of insertion loss, backreflection, unstable measurements, and network problems. The FIP-400 provides a magnified video image of the connector end face so technicians can inspect the fiber and surrounding ferrule before making a connection.
The probe combines a slim body, adjustable focus, coaxial blue LED lighting, interchangeable adapter tips, and image-capture capability. It can be connected to compatible EXFO test instruments, an FIP-400 handheld display, or a computer through the appropriate USB converter.
The FIP-400 helps technicians locate dust, oils, lint, residue, and other contamination on an optical connector. Even small particles can interfere with the fiber core or create an air gap between mating ferrules.
Contamination can increase insertion loss, reduce optical return loss, create unstable measurements, and transfer debris from one connector to another. In high-power optical systems, contamination may also contribute to permanent end-face damage.
Inspection should be performed before every connection. If contamination is present, the connector should be cleaned using a suitable fiber optic cleaning process and reinspected before it is attached to another optical interface.
In addition to cleanliness checks, the EXFO FIP-400 can help identify scratches, chips, pits, cracks, polish defects, and other visible end-face conditions. The probe offers theoretical resolution below 2 µm and detection capability below 1 µm.
Visible defects near the fiber core or cladding may affect optical performance even when the connector appears clean. Inspection imagery helps technicians distinguish removable contamination from permanent physical damage.
The probe provides visual information for inspection and documentation. Formal Pass/Fail analysis depends on the connected display or analysis platform, software, inspection criteria, and applicable organizational standards.
The FIP-400 supports both patch-cord and bulkhead inspection. Universal patch-cord tips fit directly over supported ferrules, while bulkhead tips are shaped to reach connectors installed inside adapters and optical equipment.
Using the appropriate tip allows technicians to inspect both sides of an optical connection. The patch-cord connector can be checked before installation, and the mating connector inside the bulkhead adapter can be examined separately.
This two-sided inspection process helps prevent a clean patch cord from being contaminated or damaged by an uninspected equipment port or patch-panel connector.
The EXFO FIP-400 supports angled-polish and straight physical-contact connectors when equipped with the appropriate inspection tip. Dedicated APC tips align the probe with the angled connector end face, while PC and UPC tips support straight-polish interfaces.
Supported connector families include FC, SC, ST, LC, E-2000, and universal 1.25 mm or 2.5 mm ferrule configurations. The installed tip must match the connector type, ferrule diameter, gender, polish, and adapter geometry.
An APC connector should not be inspected using a standard straight-polish tip when the angle prevents correct focus or alignment. Using the designated APC tip helps produce a properly centered image of the end face.
The FIP-400 supports compatible PC and APC MTP multifiber connectors using the appropriate dedicated inspection tips. These tips enable inspection of ribbon-fiber connectors containing multiple fiber positions within one ferrule.
Multifiber connector cleanliness is important because one contaminated MTP interface can affect several optical channels. Appropriate inspection helps technicians identify contamination or damage before a multifiber link is placed into service.
The exact MTP tip required depends on whether the connector uses PC or APC polish and on the connector configuration. Included inspection tips should be verified before the probe is selected for multifiber applications.
The probe uses coaxial blue LED illumination to light the connector end face. Coaxial lighting supports clear viewing of the fiber, ferrule, contamination, scratches, and other surface features.
Focus is adjusted directly on the probe. Dual-magnification models also include an optical magnification control for switching between low and high magnification.
The connected viewer or compatible instrument may provide additional brightness and contrast controls. These adjustments help optimize image visibility for different connector materials, polish conditions, and inspection environments.
The FIP-400-P family was available in single-magnification and dual-magnification configurations. The single-magnification version provides a fixed optical viewing level, while the dual model supports low and high optical magnification.
Low magnification helps the operator locate and center the connector end face. High magnification provides a closer view of the fiber and surrounding inspection area.
The exact probe version should be confirmed from the product label and physical controls. Dual magnification should not be assumed unless the probe includes the applicable magnification selector or is identified as an FIP-400-P-DUAL.
An image-capture button is present on all FIP-400 probe models. Capture operation depends on the connected EXFO instrument, handheld viewer, or USB interface.
Documented compatible capture configurations include the USB 2.0 adapter, EXFO FOT-930, and EXFO FTB-200. Saved images can support maintenance records, connector-cleaning verification, quality assurance, and customer documentation.
Software and file-storage capabilities depend on the connected instrument, converter, operating system, and application version.
The FIP-400 can be used with several compatible viewing configurations. It may connect to a supported EXFO test instrument, an FIP-400-D handheld display, or a computer through the correct USB converter.
The optional FIP-400-D viewer includes a 3.5-inch TFT active-matrix display with 320 x 240 resolution. It operates from a rechargeable lithium-ion battery or AC adapter and provides approximately three hours of continuous battery operation.
Available converter options include the FIP-400-USB1, which was designed for compatible FTB-400 and IQS-500 platforms, and the FIP-400-USB2 for supported computer applications.
| Brand | EXFO |
| Model | FIP-400 |
| Product Category | Video Fiber Inspection Probe |
| Inspection Applications | Patch cords, bulkhead adapters, single-fiber connectors, and multifiber connectors |
| Illumination | Coaxial blue LED |
| Focus Control | Adjustable on the probe |
| Image Capture | Capture button included on the probe |
| Probe Connection | EXFO 8-pin mini-DIN probe interface |
| Primary Application | Inspection of fiber optic connector cleanliness and end-face condition |
| Specification | Details |
| Theoretical Resolution | Less than 2 µm |
| Detection Capability | Less than 1 µm |
| Light Source | Blue LED |
| Lighting Technique | Coaxial illumination |
| Focus Control | Adjustable on the probe |
| Optical Magnification | Low and high on dual-magnification models |
| Capture Button | Present on all probe models |
| Connector | EXFO probe-port interface, 8-pin mini-DIN |
| Specification | Details |
| Probe Dimensions Without Tip Cap | 170 mm long x 32 mm wide x 38.5 mm high |
| Probe Dimensions With Tip Cap | 200 mm long x 32 mm wide x 38.5 mm high |
| Probe Weight | Approximately 0.2 kg or 0.44 lb |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -40 °C to 70 °C |
| Relative Humidity | 0% to 95%, non-condensing |
| Tip Model | Application |
| FIPT-400-FC-SC | FC and SC PC bulkhead adapters |
| FIPT-400-FC-SC-APC | FC and SC APC bulkhead adapters |
| FIPT-400-ST | ST bulkhead adapters |
| FIPT-400-LC | LC bulkhead adapters |
| FIPT-400-LC-APC | LC/APC bulkhead adapters |
| FIPT-400-E2000 | E-2000 bulkhead adapters |
| FIPT-400-MTP | MTP PC bulkhead connectors |
| FIPT-400-MTPA | MTP APC bulkhead connectors |
| FIPT-400-U25M | Universal patch-cord inspection for 2.5 mm ferrules |
| FIPT-400-U25MA | Universal patch-cord inspection for 2.5 mm APC ferrules |
| FIPT-400-U12M | Universal patch-cord inspection for 1.25 mm ferrules |
| FIPT-400-U12MA | Universal patch-cord inspection for 1.25 mm APC ferrules |
| Accessory | Details |
| Video Inspection Probe | Single- or dual-magnification version, depending on configuration |
| FC/SC Bulkhead Tip | Inspection tip for compatible FC and SC bulkhead adapters |
| Universal Patch-Cord Tip | U25M tip for compatible 2.5 mm ferrules |
| Tip Storage Case | Plastic case divided into compartments for inspection tips |
| Option | Description |
| FIP-400-D | Handheld viewer with 3.5-inch TFT display |
| FIP-400-USB1 | USB 1.1 converter with software for compatible FTB-400 and IQS-500 platforms |
| FIP-400-USB2 | USB 2.0 converter with software for supported PC applications |
The EXFO FIP-400 receives comprehensive functional and performance testing before shipment. Testing may include probe recognition, image display, illumination, focus adjustment, image clarity, capture-button operation, cable condition, and compatibility with available viewing equipment.
When the probe is a dual-magnification model, testing may also include operation at both magnification settings. Representative connector ferrules may be inspected to evaluate image centering, focus, illumination consistency, and visible defect detection.
The probe connector, cable, housing, focus control, capture button, and installed inspection tip may be checked for wear, loose components, contamination, or physical damage.
The exact testing scope depends on the probe version, included inspection tips, available FIP-400-D viewer, compatible EXFO test instrument, USB converter, software, and reference connector samples.
Buyers should confirm whether the probe is the FIP-400-P-SINGLE or FIP-400-P-DUAL configuration. Dual magnification should not be assumed from the FIP-400 family name alone.
The product listing should identify the included inspection tips. Connector support depends on the installed tip, and optional FC, SC, ST, LC, E-2000, MTP, APC, and universal ferrule tips may need to be purchased separately.
A compatible display or USB converter is required to view the probe image. The FIP-400-D handheld viewer, EXFO test platform, USB converter, computer software, AC adapter, battery, and carrying case should not be considered included unless specifically listed.
Only the inspection probe, installed tips, viewer, USB converter, software, storage case, carrying case, cables, and accessories specifically identified in the product listing should be considered included.
AssetRelay supplies professional equipment and product solutions for fiber optic, telecom, laboratory, production, inspection, cleaning, optical test, electronic test, RF/microwave, and photonics applications. The EXFO FIP-400 provides detailed connector end-face inspection for installers, field technicians, network operators, laboratories, manufacturers, service organizations, and quality-control teams.
Buyers should review the product photographs, exact probe configuration, magnification type, cable condition, included inspection tips, viewer compatibility, image quality, capture operation, and included accessories before purchase.
Please sign in first.
Sign in