Advantest D3186 Pulse Pattern Generator

Advantest D3186 Pulse Pattern Generator C/W NO options

Specification

• Operating Clock
• Operating clock source: external clock
• Frequency setting resolution: 1 kHz
• Frequency stability: ±10 ppm/year
• Output waveform: Sine wave, approx. 1 Vp-p
• Spurious: -37 dBc (non harmonic wave)
• SSB phase noise: -70 dBc/Hz (10 kHz offset, 12 GHz carrier)
• Frequency memory: 16 items
• Load impedance: 50 ?
• Connector: SMA (Jack)
• Reference frequency output: 10 MHz, 1.5 Vp-p min., AC coupled, BNC
• Reference frequency input: 10 MHz, 1.5 Vp-p min., AC coupled, BNC, automatically switched
• External Clock
• Frequency range: 150 MHz to 12 GHz
• Input level: 0.7 Vp-p to 1.5 Vp-p
• Input waveform: Sine wave
• Main unit operating frequency range: 150 MHz to 12 GHz
• Patterns
• Pattern Modes: Can be selected from the 3 choices below.
• Pseudo random pattern (PRBS)
• Fully programmable pattern (WORD)
• PRBS
• Pattern length: 2N-1, where N can be selected from among 7 choices: N=7, 9, 10, 11, 15, 23 or 31
• Mark ratio: Can be selected from among 1/2, 1/4, 1/8, 0/8, 1/2B, 3/4, 7/8, or 8/8 The patterns 1/2B, 3/4, 7/8, and 8/8 are the logical inversions of the
  patterns 1/2, 1/4, 1/8 and 0/8 respectively.
• AND bit Shift count: 1 bit
• Word
• Pattern length: 1 to 8,388,608 (2per23) bits (with ALTER- NATE OFF) 1 to 4,194,304 (2per22) bits (with ALTER- NATE ON)
• Logical inversion: Possible
• ALTERNATE mode: Can be turned ON/OFF; When ON, can be switched to either of 2 patterns, A or B
• Switching control: Internal, external switching possible
• Internal switching: Done by front panel keys or GPIB
• External switching: Done by external alternate input signal
• Main Outputs
• Number of outputs: Data, 2 patterns (DATA, DATA) Clock, 3 patterns (CLOCK1, CLOCK1,CLOCK2)
• Data Outputs (DATA, DATA)
• Number of outputs: 2 patterns (DATA, DATA,complementary)
• Format: NRZ
• Coupling: DC
• Amplitude range:
  • 0.5 Vp-p to 2 Vp-p, 10 mV steps ( TO 0 V, AC)
  • 0.6 Vp-p to 1 Vp-p, 10 mV steps ( TO -2 V)
• Offset range:
• -2 V to +2 V, 10 mV steps ( TO 0 V)
• -1 V to -0.6 V, 10 mV steps ( TO -2 V)
• Rise/fall time: 30 ps max.
• Load terminal conditions: Can be selected as either DC coupled TO 0 V, TO -2 V or AC coupled
• Offset setting level: Can be selected as either HIGH,
• MIDDLE or LOW
• Cross point variable: ON/OFF selectable
• GPIB selectable
• Load impedance: 50 ?
• Connector: 2.92 mm (plug)
• HIGH level, Pattern B at LOW level
• Input level: 0 V/-1 V
• Input impedance: Approx. 50 ? to 0 V
• Connector: BNC
• External Error Addition
• Function: When pattern error addition is external (EXT), 1 bit error is added for every fall edge of the input pulse
• Input level: 0 V/-1 V
• Input impedance: Approx. 50 ? to 0 V
• Connector: BNC
• System Functions
• Master/Slave Function
• Function: When used together with the D3286
• Error Detector, allows the pattern settings of the D3186 and D3286 to be
  interlocked.
• Panel Lock: possible
• External Clock Generator Control Function
• Function: When external clock generator (SG) isused, the frequency and output level are controlled from the D3186
• Connection method: Dedicated GPIB connector
• Remote Control
• Interface: GPIB (IEEE 488-1978)
• Calendar/Clock Function
• Display: Can be selected as either year/month/day/hour or day/hour/minute/second
• File Function: Built-in floppy disk drive
• Functions: Save, re-save, read in, erase and initialize
• Saved data: Operating conditions, pattern settings
• Read in data: Operating conditions, pattern settings
• Disks used: 3.5 inch floppy disks, 720 KB (2DD), 1.2 MB (2HD), 1.4 MB (2HD)
• Disk format: MS-DOS®
• File format: Proprietary binary format
• MS-DOS is a registered trademark of Microsoft Corporation.
• General Specifications
• Numerical value display: Green 7 segment LED display
• Operating temperature range: 0 °C to + 40 °C
  • +20 °C to +30 °C (Option 72)
• Operating humidity range: 40% to 85% RH
• Storage temperature range: -20 °C to +60 °C
• Storage humidity range: 30% to 85% RH (without condensation)
• Power: AC 100 V to 120 V, AC 220 V to 240 V (switches automatically) 48 to 63 Hz, sine wave
• Power consumption: 550 VA max.
• Mass: 42 kg max.
• External dimensions: Approx. 310 (H)×424 (W)×550 (D) mm