HP 8112A 50MHz Pulse Generator
USD $595.00
HP 70841B Pattern Generator Module
USD $325.00
Anritsu MP1758A Pulse Pattern Generator
The Anritsu MP1758A has a 4-channel data output and a 2-channel clock output. It can generate two patterns: programmable and pseudo random. The programmable pattern can be up to 128 k bit long for each channel. In addition, seven pseudo-random patterns with periods from 2per7–1 to 2per31–1 can be generated with a ¼ phase difference for each channel.
The amplitude and offset voltage of the data/clock output can be set independently for each channel. The setting ranges are 0.5 to 2.0 Vp-p for amplitude, -2.0 to +2.0 VOH for offset voltage, and -500 to +500 ps for delay between the data and clock outputs.
Features of Anritsu MP1758A
- Four independently adjustable output channels
- PRBS pattern with max. 2per31–1 bits
- Built-in synthesized clock signal
Click the PDF Specification for further information.
Request Pricing
Out-of-Stock
Condition
Used
Reference:
MP1758A
Brand:
Anritsu MP1758A PULSE PATTERN GENERATOR 100 MHz to 12.5 GHz (4 channels)
Specifications
- Operation frequency: 0.1 to 12.5 GHz (internal or external clock)
- External Clock:
- Input level: 0.8 to 2.0 Vp-p
- Input waveform: sine wave (≥ 500 MHz) or square wave
- Connector: APC-3.5
- Internal clock:
- Frequency setting resolution: 1 kHz, 1 MHz
- Reference signal: 10 MHz (internal/external, selectable)
- Pattern:
- Pseudo-random pattern: 2n–1 (n = 7, 9, 11, 15, 20, 23, 31)
- Programmable pattern: max. 128 kbit x 4 channels
- Logic inversion: provided
- Error addition (error rate): 10–n (n = 4, 5, 6, 7, 8, 9), single
- Data output:
- Output waveform: NRZ
- Number of outputs: 4 (CH 1, CH 2, CH 3, CH 4)
- Amplitude: 0.5 to 2.0 Vp-p (10 mV steps)
- Offset voltage: -2.0 to +2.0 VOH (5 mV steps)
- ECL termination: provided
- Load impedance: 50 ?
- Connector: APC-3.5
- Clock output:
- Number of outputs: 2 (CLOCK 1, CLOCK 2)
- Amplitude: 0.5 to 2.0 Vp-p (10 mV steps)
- Offset voltage: -2.0 to +2.0 VOH(5 mV steps)
- Delay: -500 to +500 ps (1 ps steps)
- ECL termination: provided
- Load impedance: 50 ?
- Connector: APC-3.5
- Sync. output:
- Number of outputs: 1 (1/32 CLOCK OUTPUT/PATTERN SYNC. OUTPUT, selectable)
- Amplitude: 0/-1 V
- Load impedance: 50 ?
- Connector: SMA
- Control:
- Control interface: GPIB, parallel
- Parameter memory: 3.5-inch FD (MS-DOS compatible)
- Dimensions and mass: 426 (W) x 221 (H) x 450 (D) mm, ≤37 kg
- Operating Temperature: 15-35°C
For more information please contact us!!